Skip to content

F
freeswitch
提交 eb93a14e authored 作者: Giovanni Maruzzelli's avatar Giovanni Maruzzelli
浏览文件
操作

gsmopen: correctly sends SMSs in GSM7 or UCS2. Let's check SMS receiving

上级 4101e6b2
隐藏空白字符变更
内嵌 并排
正在显示 包含 50 行增加 和 108 行删除
src/mod/endpoints/mod_gsmopen/gsmopen_protocol.cpp
浏览文件 @ eb93a14e
......@@ -367,7 +367,6 @@ int gsmopen_serial_config_AT(private_t *tech_pvt)
if (res) {
DEBUGA_GSMOPEN("AT+CMGF? failed, continue\n", GSMOPEN_P_LOG);
}
#ifndef WANT_GSMLIB
res = gsmopen_serial_write_AT_ack(tech_pvt, "AT+CMGF=1");
if (res) {
ERRORA("Error setting SMS sending mode to TEXT on the cellphone, let's hope is TEXT by default. Continuing\n", GSMOPEN_P_LOG);
......@@ -402,7 +401,6 @@ int gsmopen_serial_config_AT(private_t *tech_pvt)
WARNINGA("AT+CSMP do not got OK from the phone, continuing\n", GSMOPEN_P_LOG);
}
}
#else // WANT_GSMLIB
res = gsmopen_serial_write_AT_ack(tech_pvt, "AT+CMGF=0");
if (res) {
......@@ -410,6 +408,7 @@ int gsmopen_serial_config_AT(private_t *tech_pvt)
}
tech_pvt->sms_pdu_not_supported = 0;
tech_pvt->no_ucs2 = 1;
#ifdef NOTDEF //GSMLIB? XXX
if (tech_pvt->no_ucs2) {
res = gsmopen_serial_write_AT_ack(tech_pvt, "AT+CSCS=\"GSM\"");
if (res) {
......@@ -421,7 +420,7 @@ int gsmopen_serial_config_AT(private_t *tech_pvt)
WARNINGA("AT+CSMP do not got OK from the phone, continuing\n", GSMOPEN_P_LOG);
}
}
#endif // WANT_GSMLIB
#endif// NOTDEF //GSMLIB? XXX
#ifdef NOTDEF //GSMLIB? XXX
......@@ -1666,7 +1665,6 @@ int gsmopen_serial_read_AT(private_t *tech_pvt, int look_for_ack, int timeout_us
} else {
#ifdef WANT_GSMLIB
try {
char content2[1000];
SMSMessageRef sms;
......@@ -1719,7 +1717,6 @@ int gsmopen_serial_read_AT(private_t *tech_pvt, int look_for_ack, int timeout_us
}
#endif // WANT_GSMLIB
......@@ -2731,117 +2728,70 @@ int gsmopen_sendsms(private_t *tech_pvt, char *dest, char *text)
char pdu2[16000];
memset(pdu2, '\0', sizeof(pdu2));
int pdulenght = 0;
string pdu;
PUSHA_UNLOCKA(&tech_pvt->controldev_lock);
LOKKA(tech_pvt->controldev_lock);
#ifndef WANT_GSMLIB
err = gsmopen_serial_write_AT_ack(tech_pvt, "AT+CMGF=1");
if (err) {
ERRORA("AT+CMGF=1 (set message sending to TEXT (as opposed to PDU) do not got OK from the phone\n", GSMOPEN_P_LOG);
}
#else // WANT_GSMLIB
err = gsmopen_serial_write_AT_ack(tech_pvt, "AT+CMGF=0");
if (err) {
ERRORA("AT+CMGF=0 (set message sending to TEXT (as opposed to PDU) do not got OK from the phone\n", GSMOPEN_P_LOG);
}
#endif // WANT_GSMLIB
if (tech_pvt->no_ucs2 || tech_pvt->sms_pdu_not_supported == 0) {
#ifdef WANT_GSMLIB
try {
SMSMessageRef smsMessage;
int bad_8859=0;
memset(mesg_test, '\0', sizeof(mesg_test));
sprintf(mesg_test, ":) ciao belè новости לק ראת ﺎﻠﺠﻤﻋﺓ 人大aèéàòçù"); //let's test the beauty of utf8
//sprintf(mesg_test,":) ciao belè èéàòìù");
//text=mesg_test;
utf8_to_iso_8859_1(tech_pvt, text, strlen(text), smscommand, sizeof(smscommand));
smsMessage = new SMSSubmitMessage(smscommand, dest);
string pdu = smsMessage->encode();
strncpy(pdu2, pdu.c_str(), sizeof(pdu2) - 1);
memset(smscommand, '\0', sizeof(smscommand));
pdulenght = pdu.length() / 2 - 1;
sprintf(smscommand, "AT+CMGS=%d", pdulenght);
#ifdef NOTDEF
***9. How to support unicode ? You need 6 steps : 1. set datacodingschema to DCS_SIXTEEN_BIT_ALPHABET 2. set your locale correctly, for example
, my locale, china.setlocale(LC_ALL, "chs");
3. translate MBCS(multiple byte character set) string to unicode string.wchar_t wstr[1000];
memset(wstr, 0, 2000);
mbstowcs(wstr, data.c_str(), data.length());
4. get unicode string length.int wcs_len = wcslen(wstr);
5. change unicode string to net order.for (int i = 0; i < wcs_len; i++)
wstr[i] = htons(wstr[i]);
6. put unicode string into pdu.char content2[1000];
SMSMessageRef sms;
//MessageType messagetype;
//Address servicecentreaddress;
//Timestamp servicecentretimestamp;
//Address sender_recipient_address;
sms = SMSMessage::decode(tech_pvt->line_array.result[i]); // dataCodingScheme = 8 , text=ciao 123 belè новости לק ראת ﺎﻠﺠﻤﻋﺓ 人大
bad_8859 = utf8_to_iso_8859_1(tech_pvt, text, strlen(text), smscommand, sizeof(smscommand));
if(!bad_8859){
err = gsmopen_serial_write_AT_ack(tech_pvt, "AT+CMGF=0");
if (err) {
ERRORA("AT+CMGF=0 (set message sending to PDU (as opposed to TEXT) do not got OK from the phone\n", GSMOPEN_P_LOG);
}
SMSMessageRef smsMessage;
smsMessage = new SMSSubmitMessage(smscommand, dest);
//string pdu = smsMessage->encode();
pdu = smsMessage->encode();
strncpy(pdu2, pdu.c_str(), sizeof(pdu2) - 1);
memset(smscommand, '\0', sizeof(smscommand));
pdulenght = pdu.length() / 2 - 1;
sprintf(smscommand, "AT+CMGS=%d", pdulenght);
} else {
int ok;
DEBUGA_GSMOPEN("SMS=\n%s\n", GSMOPEN_P_LOG, sms->toString().c_str());
UNLOCKA(tech_pvt->controldev_lock);
POPPA_UNLOCKA(&tech_pvt->controldev_lock);
memset(content2, '\0', sizeof(content2));
if (sms->dataCodingScheme().getAlphabet() == DCS_DEFAULT_ALPHABET) {
iso_8859_1_to_utf8(tech_pvt, (char *) sms->userData().c_str(), content2, sizeof(content2));
} else if (sms->dataCodingScheme().getAlphabet() == DCS_SIXTEEN_BIT_ALPHABET) {
ucs2_to_utf8(tech_pvt, (char *) bufToHex((unsigned char *) sms->userData().data(), sms->userData().length()).c_str(), content2,
sizeof(content2));
} else {
ERRORA("dataCodingScheme not supported=%d\n", GSMOPEN_P_LOG, sms->dataCodingScheme().getAlphabet());
tech_pvt->no_ucs2 = 0;
tech_pvt->sms_pdu_not_supported =1;
ok= gsmopen_sendsms(tech_pvt, dest, text);
tech_pvt->no_ucs2 = 1;
tech_pvt->sms_pdu_not_supported =0;
return ok;
}
DEBUGA_GSMOPEN("dataCodingScheme=%d\n", GSMOPEN_P_LOG, sms->dataCodingScheme().getAlphabet());
DEBUGA_GSMOPEN("dataCodingScheme=%s\n", GSMOPEN_P_LOG, sms->dataCodingScheme().toString().c_str());
DEBUGA_GSMOPEN("address=%s\n", GSMOPEN_P_LOG, sms->address().toString().c_str());
DEBUGA_GSMOPEN("serviceCentreAddress=%s\n", GSMOPEN_P_LOG, sms->serviceCentreAddress().toString().c_str());
DEBUGA_GSMOPEN("serviceCentreTimestamp=%s\n", GSMOPEN_P_LOG, sms->serviceCentreTimestamp().toString().c_str());
DEBUGA_GSMOPEN("messageType=%d\n", GSMOPEN_P_LOG, sms->messageType());
DEBUGA_GSMOPEN("userData= |||%s|||\n", GSMOPEN_P_LOG, content2);
memset(sms_body, '\0', sizeof(sms_body));
strncpy(sms_body, content2, sizeof(sms_body));
DEBUGA_GSMOPEN("body=%s\n", GSMOPEN_P_LOG, sms_body);
strncpy(tech_pvt->sms_body, sms_body, sizeof(tech_pvt->sms_body));
strncpy(tech_pvt->sms_sender, sms->address().toString().c_str(), sizeof(tech_pvt->sms_sender));
strncpy(tech_pvt->sms_date, sms->serviceCentreTimestamp().toString().c_str(), sizeof(tech_pvt->sms_date));
strncpy(tech_pvt->sms_datacodingscheme, sms->dataCodingScheme().toString().c_str(), sizeof(tech_pvt->sms_datacodingscheme));
strncpy(tech_pvt->sms_servicecentreaddress, sms->serviceCentreAddress().toString().c_str(), sizeof(tech_pvt->sms_servicecentreaddress));
tech_pvt->sms_messagetype = sms->messageType();
//messagetype = sms->messageType();
//servicecentreaddress = sms->serviceCentreAddress();
//servicecentretimestamp = sms->serviceCentreTimestamp();
//sender_recipient_address = sms->address();
#endif // NOTDEF
}
catch(GsmException & ge) {
ERRORA("GsmException= |||%s|||\n", GSMOPEN_P_LOG, ge.what());
}
#else // WANT_GSMLIB
ERRORA("tech_pvt->no_ucs2 || tech_pvt->sms_pdu_not_supported == 0 && no WANT_GSMLIB\n", GSMOPEN_P_LOG);
return RESULT_FAILURE;
#endif // WANT_GSMLIB
} else {
char dest2[1048];
err = gsmopen_serial_write_AT_ack(tech_pvt, "AT+CMGF=1");
if (err) {
ERRORA("AT+CMGF=1 (set message sending to TEXT (as opposed to PDU) do not got OK from the phone\n", GSMOPEN_P_LOG);
}
/*
err = gsmopen_serial_write_AT_ack(tech_pvt, "AT+CSCS=\"UCS2\"");
if (err) {
ERRORA("AT+CSCS=\"UCS2\" (set TE messages to ucs2) do not got OK from the phone\n", GSMOPEN_P_LOG);
}
*/
memset(dest2, '\0', sizeof(dest2));
utf8_to_ucs2(tech_pvt, dest, strlen(dest), dest2, sizeof(dest2));
......@@ -2854,7 +2804,6 @@ int gsmopen_sendsms(private_t *tech_pvt, char *dest, char *text)
goto uscita;
}
err = gsmopen_serial_AT_expect(tech_pvt, "> ", 0, 1); // wait 1.1s for the prompt, no crlf
#if 1
if (err) {
DEBUGA_GSMOPEN
("Error or timeout getting prompt '> ' for sending sms directly to the remote party. BTW, seems that we cannot do that with Motorola c350, so we'll write to cellphone memory, then send from memory\n",
......@@ -2879,24 +2828,23 @@ int gsmopen_sendsms(private_t *tech_pvt, char *dest, char *text)
goto uscita;
}
}
#endif
#ifndef WANT_GSMLIB
memset(mesg_test, '\0', sizeof(mesg_test));
sprintf(mesg_test, ":) ciao belè новости לק ראת ﺎﻠﺠﻤﻋﺓ 人大aèéàòçù"); //let's test the beauty of utf8
//text=mesg_test;
if (tech_pvt->no_ucs2 || tech_pvt->sms_pdu_not_supported == 0) {
memset(smscommand, '\0', sizeof(smscommand));
sprintf(smscommand, "%s", pdu2);
}else{
memset(mesg_test, '\0', sizeof(mesg_test));
sprintf(mesg_test, ":) ciao belè новости לק ראת ﺎﻠﺠﻤﻋﺓ 人大aèéàòçù"); //let's test the beauty of utf8
//text=mesg_test;
memset(smscommand, '\0', sizeof(smscommand));
if (tech_pvt->no_ucs2) {
sprintf(smscommand, "%s", text);
} else {
utf8_to_ucs2(tech_pvt, text, strlen(text), smscommand, sizeof(smscommand));
}
memset(smscommand, '\0', sizeof(smscommand));
if (tech_pvt->no_ucs2) {
sprintf(smscommand, "%s", text);
} else {
utf8_to_ucs2(tech_pvt, text, strlen(text), smscommand, sizeof(smscommand));
}
#else // WANT_GSMLIB
memset(smscommand, '\0', sizeof(smscommand));
sprintf(smscommand, "%s", pdu2);
#endif // WANT_GSMLIB
smscommand[strlen(smscommand)] = 0x1A;
DEBUGA_GSMOPEN("smscommand len is: %d, text is:|||%s|||\n", GSMOPEN_P_LOG, (int) strlen(smscommand), smscommand);
......@@ -2923,7 +2871,7 @@ int gsmopen_sendsms(private_t *tech_pvt, char *dest, char *text)
ERRORA("Error de-activating echo from modem\n", GSMOPEN_P_LOG);
}
}
uscita:
uscita:
gsmopen_sleep(1000);
if (tech_pvt->at_cmgw[0]) {
......@@ -2948,12 +2896,6 @@ int gsmopen_sendsms(private_t *tech_pvt, char *dest, char *text)
UNLOCKA(tech_pvt->controldev_lock);
POPPA_UNLOCKA(&tech_pvt->controldev_lock);
}
#ifdef NOTDEF
err = gsmopen_serial_write_AT_ack(tech_pvt, "AT+CMGF=0");
if (err) {
DEBUGA_GSMOPEN("AT+CMGF=0 (set message sending to PDU (as opposed to TEXT) do not got OK from the phone, continuing\n", GSMOPEN_P_LOG);
}
#endif // NOTDEF
DEBUGA_GSMOPEN("FINISH\n", GSMOPEN_P_LOG);
if (failed)
......
Markdown 格式
0% 或
您添加了 0 人 到此讨论。请谨慎行事。
请先完成此评论的编辑！
请 注册 或者 后发表评论