add test version of jrtp that includes jrtp4c and jthread. Autoconf\Automake…

add test version of jrtp that includes jrtp4c and jthread.  Autoconf\Automake needs to be re-run on this and it needs to be tested on unix platforms.

git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@166 d0543943-73ff-0310-b7d9-9358b9ac24b2

libs/test/jrtplib/INSTALL

+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PREFIX'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PREFIX', the package will
+use PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the `--target=TYPE' option to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).  Here is a another example:
+
+     /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+configuration-related scripts to be executed by `/bin/bash'.
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+

libs/test/jrtplib/LICENSE.MIT

+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute, sublicense,
+and/or sell copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included
+in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+IN THE SOFTWARE.
+

libs/test/jrtplib/Makefile.am

+SUBDIRS = src tools doc examples pkgconfig
+EXTRA_DIST = LICENSE.MIT ChangeLog README.TXT jrtplib.dsw jrtplib.dsp jrtplib.vcproj \
+	     jrtplib.sln jrtplib_wce.vcproj jrtplib_wce.sln
+
+dist-hook: distclean
+	rm -f $(distdir)/src/rtpconfig_unix.h
+	rm -f $(distdir)/src/rtptypes_unix.h
+	mv $(distdir)/jrtplib.dsw $(distdir)/jrtplib.dsw.tmp
+	mv $(distdir)/jrtplib.dsp $(distdir)/jrtplib.dsp.tmp
+	todos < $(distdir)/jrtplib.dsw.tmp > $(distdir)/jrtplib.dsw
+	todos < $(distdir)/jrtplib.dsp.tmp > $(distdir)/jrtplib.dsp
+	rm $(distdir)/jrtplib.dsw.tmp
+	rm $(distdir)/jrtplib.dsp.tmp
+	chmod a-x $(distdir)/jrtplib.vcproj
+	chmod a-x $(distdir)/jrtplib.sln
+	chmod a-x $(distdir)/jrtplib_wce.vcproj
+	chmod a-x $(distdir)/jrtplib_wce.sln

libs/test/jrtplib/README.TXT

+------------------------------------------------------------------------------
+                                                               October 2, 2005
+
+
+                                   JRTPLIB (v3.3.0)
+
+
+                      Developed at the The Expertise Centre for 
+                      Digital Media (EDM), a research institute  
+                              of the Hasselt University
+
+                             http://www.edm.uhasselt.be/
+                               http://www.uhasselt.be/
+
+
+LIBRARY LOCATION AND CONTACT
+============================
+Normally, you should be able to download the latest version of the library
+from this url:
+	http://research.edm.uhasselt.be/jori/jrtplib/jrtplib.html
+
+If you have questions about the library, you can mail me at:
+	jori@lumumba.uhasselt.be
+	
+There is also a mailing list for the library. To subscribe to the list, 
+send an e-mail with the text 'subscribe jrtplib' as the message body (not 
+the subject) to majordomo@edm.uhasselt.be and you'll receive further 
+instructions.
+
+ACKNOWLEDGMENT
+==============
+I would like thank the people at the Expertise Centre for Digital Media
+for giving me the opportunity to create this rewrite of the library.
+
+DISCLAIMER & COPYRIGHT
+======================
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute, sublicense,
+and/or sell copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included
+in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+IN THE SOFTWARE.
+
+INSTALLATION NOTES
+==================
+
+* To compile the library on a unix-like platform, just start the configure
+  script. This should generate a makefile which you can use to start
+  building the library using 'make'.
+
+* To compile the library on an MS-Windows platfrom: Visual Studio
+  workspace files are included. The project will search
+  for JThread files in ..\jthread-1.1.2
+  To compile the library without using JThread, comment the line
+  with RTP_SUPPORT_THREAD in rtpconfig_win.h
+  Note that for Visual Studio 6, you must have service pack 6 for 
+  installed to be able to compile the library.  (NOTE:  In this copy
+  of the lib, jthread has been included and does not need to be included
+  seperately)
+
+* For a manual about the library, please refer to doc/ subdirectory.
+  Using 'make doc', a PDF version of the documentation will be built.
+  Note that you'll need to have the pdflatex LaTeX compiler installed.
+  Alternatively, you can download the documentation from the homepage:
+  http://research.edm.uhasselt.be/jori/jrtplib/jrtplib.pdf
+
+* For systems with low memory or for applications which will involve only
+  a few participants at a time:
+  You can set the HASHSIZE defines in rtpsources.h, rtpudpv4transmitter.h
+  and rtpudpv6transmitter.h to a lower value to avoid memory being wasted.
+  Note that the library will have to be recompiled.
+
+* Used defines:
+	- WIN32:
+		For compilation on an Win32 platform.
+	- _WIN32_WCE:
+		Define needed for compilation on a WinCE platform
+	- RTP_HAVE_SYS_FILIO:
+		Set if <sys/filio.h> exists.
+	- RTP_HAVE_SYS_SOCKIO:
+		Set if <sys/sockio.h> exists.
+	- RTP_BIG_ENDIAN:
+		If set, assume big-endian byte ordering.
+	- RTP_SOCKLENTYPE_UINT:
+		Indicates that getsockname used an unsigned int as its
+		third parameter.
+	- RTP_HAVE_SOCKADDR_LEN:
+		Indicates that struct sockaddr has an sa_len field.
+	- RTP_SUPPORT_IPV4MULTICAST:
+		Enables support for IPv4 multicasting.
+	- RTP_SUPPORT_THREAD:
+		Enables support for JThread.
+	- RTP_SUPPORT_SDESPRIV:
+		Enables support for RTCP SDES private items.
+	- RTP_SUPPORT_INLINETEMPLATEPARAM:
+		If set, the compiler should be able to handle an inline
+		function as a template parameter.
+	- RTP_SUPPORT_PROBATION:
+		If set, a few consecutive RTP packets are needed to validate
+		a member.
+	- RTP_SUPPORT_GNUDRAND:
+		If set, the RTPRandom class will use drand48_r and srand48_r
+	- RTP_SUPPORT_RANDR:
+		If set and RTP_SUPPORT_GNUDRAND is not set, the RTPRandom
+		class will use rand_r.
+	- RTP_SUPPORT_GETLOGINR:
+		If set, the library will use getlogin_r instead of getlogin.
+	- RTP_SUPPORT_IPV6:
+		If set, IPv6 support is enabled.
+	- RTP_SUPPORT_IPV6MULTICAST:
+		If set, IPv6 multicasting support is enabled.
+	- RTP_SUPPORT_GST:
+		If set, GStreamer support is enabled.
+	- RTPDEBUG:
+		Enables some memory tracking functions and some debug routines.
+	
+------------------------------------------------------------------------------
+

libs/test/jrtplib/doc/Makefile.am

+EXTRA_DIST = jrtplib.tex manual.tex
+
+doc: jrtplib.pdf
+	
+jrtplib.pdf: jrtplib.tex
+	pdflatex jrtplib.tex
+	pdflatex jrtplib.tex
+
+clean:
+	rm -f jrtplib.{toc,aux,log,pdf}

libs/test/jrtplib/doc/manual.tex

+\documentclass[a4paper,12pt]{article}
+\usepackage{listings}
+\lstset{language=C++}
+\lstset{tabsize=4}
+\begin{document}
+	\title{JThread manual (v1.1.2)}
+	\author{Jori Liesenborgs\\
+	        {\tt jori@lumumba.uhasselt.be} }
+	\date{September 14, 2005}
+	\maketitle
+
+	\section{Introduction}
+
+	A lot of projects on which I'm working use threads. To be able to
+	use the same code on both unix and MS-Windows platforms, I decided
+	to write some simple wrapper classes for the existing thread functions
+	on those platforms.
+
+	The JThread package is very simple: currently, it only contains two
+	classes, namely {\tt JThread} and {\tt JMutex}. As their names 
+	suggest, {\tt JThread} represents a thread and {\tt JMutex} a mutex.
+	The thread class only contains very basic functions, for example to
+	start or kill a thread.
+
+	\section{Copyright \& disclaimer}
+
+	Permission is hereby granted, free of charge, to any person obtaining a
+	copy of this software and associated documentation files (the "Software"),
+	to deal in the Software without restriction, including without limitation
+	the rights to use, copy, modify, merge, publish, distribute, sublicense,
+	and/or sell copies of the Software, and to permit persons to whom the
+	Software is furnished to do so, subject to the following conditions:
+
+	The above copyright notice and this permission notice shall be included
+	in all copies or substantial portions of the Software.
+
+	THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+	OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+	FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+	THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+	LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+	FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+	IN THE SOFTWARE.
+
+	\section{Usage}
+
+	Here follows a description of the {\tt JThread} and {\tt JMutex} classes. 
+	Note that functions with return type {\tt int} always return a value of zero
+	or more on success and a negative value in case something went wrong.
+
+	\subsection{{\tt JMutex}}
+
+	The class definition of {\tt JMutex} is shown below. Before you can use an
+	instance of this type, you must first call the {\tt Init} function. You can
+	check if the mutex was already initialized by checking the return value
+	of {\tt IsInitialized}. After the initialization, the mutex can be locked
+	and unlocked by calling the functions {\tt Lock} and {\tt Unlock} respectively.
+
+\begin{lstlisting}[frame=tb]{}
+class JMutex
+{
+public:
+	JMutex();
+	~JMutex();
+	int Init();
+	int Lock();
+	int Unlock();
+	bool IsInitialized();
+};	
+\end{lstlisting}
+
+	\subsection{{\tt JThread}}
+	
+	To create your own thread, you have to derive a class from {\tt JThread},
+	which is depicted below. In your derived class, you have to implement
+	a member function {\tt Thread}, which will be executed in the new thread.
+	Your own {\tt Thread} implementation should call {\tt ThreadStarted}
+	immediately.
+
+	To start your thread, you simply have to call the {\tt Start} function.
+	This function finishes when your own {\tt Thread} function has called
+	{\tt ThreadStarted}. This way, when the {\tt Start} function
+	finishes, you can be really sure that your own {\tt Thread} implementation
+	is really running.
+
+	You can check if the thread is still running by calling {\tt IsRunning}.
+	If the thread has finished, you can check its return value by calling
+	{\tt GetReturnValue}. Finally, in case your thread gets stuck, you can
+	end it by using the {\tt Kill} function.
+
+	You should be careful with this {\tt Kill} function: if you call it when
+	the thread is working with a mutex (for example an internal mutex), this
+	mutex can be left in a locked state, which in turn can cause another thread
+	to block. You should only use the {\tt Kill} function when you're absolutely
+	sure that the thread is stuck in some loop and cannot be ended otherwise.
+
+\begin{lstlisting}[frame=tb]{}
+class JThread
+{
+public:
+	JThread();
+	virtual ~JThread();
+	int Start();
+	int Kill();
+	virtual void *Thread() = 0;
+	bool IsRunning();
+	void *GetReturnValue();
+protected:
+	void ThreadStarted();
+};
+\end{lstlisting}
+	
+\end{document}
+

libs/test/jrtplib/examples/Makefile.am

+noinst_PROGRAMS = example1 example2 example3 example4
+
+example1_SOURCES = example1.cpp
+example2_SOURCES = example2.cpp
+example3_SOURCES = example3.cpp
+example4_SOURCES = example4.cpp
+
+INCLUDES = @RTP_JTHREADINCLUDES@ @RTP_GSTINCLUDES@ -I ../src/
+LDADD = ../src/.libs/libjrtp.a @RTP_LINKLIBS@
+

libs/test/jrtplib/examples/example2.cpp

+#include "rtpsession.h"
+#include "rtpsessionparams.h"
+#include "rtpudpv4transmitter.h"
+#include "rtpipv4address.h"
+#include "rtptimeutilities.h"
+#include "rtppacket.h"
+#include <stdlib.h>
+#include <iostream>
+
+int main(void)
+{
+#ifdef WIN32
+	WSADATA dat;
+	WSAStartup(MAKEWORD(2,2),&dat);
+#endif // WIN32
+		
+	RTPSession session;
+	
+	RTPSessionParams sessionparams;
+	sessionparams.SetOwnTimestampUnit(1.0/8000.0);
+			
+	RTPUDPv4TransmissionParams transparams;
+	transparams.SetPortbase(8000);
+			
+	int status = session.Create(sessionparams,&transparams);
+	if (status < 0)
+	{
+		std::cerr << RTPGetErrorString(status) << std::endl;
+		exit(-1);
+	}
+	
+	u_int8_t localip[]={127,0,0,1};
+	RTPIPv4Address addr(localip,9000);
+	
+	status = session.AddDestination(addr);
+	if (status < 0)
+	{
+		std::cerr << RTPGetErrorString(status) << std::endl;
+		exit(-1);
+	}
+	
+	session.SetDefaultPayloadType(96);
+	session.SetDefaultMark(false);
+	session.SetDefaultTimestampIncrement(160);
+	
+	u_int8_t silencebuffer[160];
+	for (int i = 0 ; i < 160 ; i++)
+		silencebuffer[i] = 128;
+
+	RTPTime delay(0.020);
+	RTPTime starttime = RTPTime::CurrentTime();
+	
+	bool done = false;
+	while (!done)
+	{
+		status = session.SendPacket(silencebuffer,160);
+		if (status < 0)
+		{
+			std::cerr << RTPGetErrorString(status) << std::endl;
+			exit(-1);
+		}
+		
+		session.BeginDataAccess();
+		if (session.GotoFirstSource())
+		{
+			do
+			{
+				RTPPacket *packet = session.GetNextPacket();
+				if (packet)
+				{
+					std::cout << "Got packet with " 
+					          << "extended sequence number " 
+					          << packet->GetExtendedSequenceNumber() 
+					          << " from SSRC " << packet->GetSSRC() 
+					          << std::endl;
+					delete packet;
+				}
+			} while (session.GotoNextSource());
+		}
+		session.EndDataAccess();
+			
+		RTPTime::Wait(delay);
+		
+		RTPTime t = RTPTime::CurrentTime();
+		t -= starttime;
+		if (t > RTPTime(60.0))
+			done = true;
+	}
+	
+	delay = RTPTime(10.0);
+	session.BYEDestroy(delay,"Time's up",9);
+	
+#ifdef WIN32
+	WSACleanup();
+#endif // WIN32
+	return 0;
+}
+

libs/test/jrtplib/jrtplib.dsw

+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "jrtplib"=.\jrtplib.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+